§ 121.162. ETOPS Type Design Approval Basis.
223 words·~1 min read·
/us/cfr/t14/s§ 121.162·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Except for a passenger-carrying airplane with more than two engines manufactured prior to February 17, 2015 and except for a two-engine airplane that, when used in ETOPS, is only used for ETOPS of 75 minutes or less, no certificate holder may conduct ETOPS unless the airplane has been type design approved for ETOPS and each airplane used in ETOPS complies with its CMP document as follows:
(a)For a two-engine airplane, that is of the same model airplane-engine combination that received FAA approval for ETOPS up to 180 minutes prior to February 15, 2007, the CMP document for that model airplane-engine combination in effect on February 14, 2007.
(b)For a two-engine airplane, that is not of the same model airplane-engine combination that received FAA approval for ETOPS up to 180 minutes before February 15, 2007, the CMP document for that new model airplane-engine combination issued in accordance with § 25.3(b)(1) of this chapter.
(c)For a two-engine airplane approved for ETOPS beyond 180 minutes, the CMP document for that model airplane-engine combination issued in accordance with § 25.3(b)(2) of this chapter.
(d)For an airplane with more than 2 engines manufactured on or after February 17, 2015, the CMP document for that model airplane-engine combination issued in accordance with § 25.3(c) of this chapter. [Docket FAA-2002-6717, 72 FR 1879, Jan. 16, 2007]
Connections1 cite this
Cited by 1 section
register
Citation graph
cites case law
§ 121.162
ETOPS Type Design Approval Basis.
Fed. Reg.×1
Cites 0Cited by 1 across 1 source